Annotation of /psiconv/trunk/missing

#! /bin/sh
# Common stub for a few missing GNU programs while installing.
# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.

if test $# -eq 0; then
  echo 1>&2 "Try \`$0 --help' for more information"
  exit 1
fi

case "$1" in

  -h|--h|--he|--hel|--help)
    echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...

Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.

Options:
  -h, --help      display this help and exit
  -v, --version   output version information and exit

Supported PROGRAM values:
  aclocal      touch file \`aclocal.m4'
  autoconf     touch file \`configure'
  autoheader   touch file \`config.h.in'
  automake     touch all \`Makefile.in' files
  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
  flex         create \`lex.yy.c', if possible, from existing .c
  lex          create \`lex.yy.c', if possible, from existing .c
  makeinfo     touch the output file
  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
    ;;

  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
    echo "missing - GNU libit 0.0"
    ;;

  -*)
    echo 1>&2 "$0: Unknown \`$1' option"
    echo 1>&2 "Try \`$0 --help' for more information"
    exit 1
    ;;

  aclocal)
    echo 1>&2 "\
WARNING: \`$1' is missing on your system.  You should only need it if
         you modified \`acinclude.m4' or \`configure.in'.  You might want
         to install the \`Automake' and \`Perl' packages.  Grab them from
         any GNU archive site."
    touch aclocal.m4
    ;;

  autoconf)
    echo 1>&2 "\
WARNING: \`$1' is missing on your system.  You should only need it if
         you modified \`configure.in'.  You might want to install the
         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
         archive site."
    touch configure
    ;;

  autoheader)
    echo 1>&2 "\
WARNING: \`$1' is missing on your system.  You should only need it if
         you modified \`acconfig.h' or \`configure.in'.  You might want
         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
         from any GNU archive site."
    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`
    test -z "$files" && files="config.h"
    touch_files=
    for f in $files; do
      case "$f" in
      *:*) touch_files="$touch_files "`echo "$f" |
                                       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
      *) touch_files="$touch_files $f.in";;
      esac
    done
    touch $touch_files
    ;;

  automake)
    echo 1>&2 "\
WARNING: \`$1' is missing on your system.  You should only need it if
         you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
         You might want to install the \`Automake' and \`Perl' packages.
         Grab them from any GNU archive site."
    find . -type f -name Makefile.am -print |
           sed 's/\.am$/.in/' |
           while read f; do touch "$f"; done
    ;;

  bison|yacc)
    echo 1>&2 "\
WARNING: \`$1' is missing on your system.  You should only need it if
         you modified a \`.y' file.  You may need the \`Bison' package
         in order for those modifications to take effect.  You can get
         \`Bison' from any GNU archive site."
    rm -f y.tab.c y.tab.h
    if [ $# -ne 1 ]; then
        eval LASTARG="\${$#}"
        case "$LASTARG" in
        *.y)
            SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
            if [ -f "$SRCFILE" ]; then
                 cp "$SRCFILE" y.tab.c
            fi
            SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
            if [ -f "$SRCFILE" ]; then
                 cp "$SRCFILE" y.tab.h
            fi
          ;;
        esac
    fi
    if [ ! -f y.tab.h ]; then
        echo >y.tab.h
    fi
    if [ ! -f y.tab.c ]; then
        echo 'main() { return 0; }' >y.tab.c
    fi
    ;;

  lex|flex)
    echo 1>&2 "\
WARNING: \`$1' is missing on your system.  You should only need it if
         you modified a \`.l' file.  You may need the \`Flex' package
         in order for those modifications to take effect.  You can get
         \`Flex' from any GNU archive site."
    rm -f lex.yy.c
    if [ $# -ne 1 ]; then
        eval LASTARG="\${$#}"
        case "$LASTARG" in
        *.l)
            SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
            if [ -f "$SRCFILE" ]; then
                 cp "$SRCFILE" lex.yy.c
            fi
          ;;
        esac
    fi
    if [ ! -f lex.yy.c ]; then
        echo 'main() { return 0; }' >lex.yy.c
    fi
    ;;

  makeinfo)
    echo 1>&2 "\
WARNING: \`$1' is missing on your system.  You should only need it if
         you modified a \`.texi' or \`.texinfo' file, or any other file
         indirectly affecting the aspect of the manual.  The spurious
         call might also be the consequence of using a buggy \`make' (AIX,
         DU, IRIX).  You might want to install the \`Texinfo' package or
         the \`GNU make' package.  Grab either from any GNU archive site."
    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
    if test -z "$file"; then
      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
    fi
    touch $file
    ;;

  *)
    echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
         system.  You might have modified some files without having the
         proper tools for further handling them.  Check the \`README' file,
         it often tells you about the needed prerequirements for installing
         this package.  You may also peek at any GNU archive site, in case
         some other package would contain this missing \`$1' program."
    exit 1
    ;;
esac

exit 0
1	frodo	2	#! /bin/sh
2			# Common stub for a few missing GNU programs while installing.
3			# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
4			# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.
5
6			# This program is free software; you can redistribute it and/or modify
7			# it under the terms of the GNU General Public License as published by
8			# the Free Software Foundation; either version 2, or (at your option)
9			# any later version.
10
11			# This program is distributed in the hope that it will be useful,
12			# but WITHOUT ANY WARRANTY; without even the implied warranty of
13			# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14			# GNU General Public License for more details.
15
16			# You should have received a copy of the GNU General Public License
17			# along with this program; if not, write to the Free Software
18			# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
19			# 02111-1307, USA.
20
21			if test $# -eq 0; then
22			echo 1>&2 "Try \`$0 --help' for more information"
23			exit 1
24			fi
25
26			case "$1" in
27
28			-h\|--h\|--he\|--hel\|--help)
29			echo "\
30			$0 [OPTION]... PROGRAM [ARGUMENT]...
31
32			Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
33			error status if there is no known handling for PROGRAM.
34
35			Options:
36			-h, --help display this help and exit
37			-v, --version output version information and exit
38
39			Supported PROGRAM values:
40			aclocal touch file \`aclocal.m4'
41			autoconf touch file \`configure'
42			autoheader touch file \`config.h.in'
43			automake touch all \`Makefile.in' files
44			bison create \`y.tab.[ch]', if possible, from existing .[ch]
45			flex create \`lex.yy.c', if possible, from existing .c
46			lex create \`lex.yy.c', if possible, from existing .c
47			makeinfo touch the output file
48			yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
49			;;
50
51			-v\|--v\|--ve\|--ver\|--vers\|--versi\|--versio\|--version)
52			echo "missing - GNU libit 0.0"
53			;;
54
55			-*)
56			echo 1>&2 "$0: Unknown \`$1' option"
57			echo 1>&2 "Try \`$0 --help' for more information"
58			exit 1
59			;;
60
61			aclocal)
62			echo 1>&2 "\
63			WARNING: \`$1' is missing on your system. You should only need it if
64			you modified \`acinclude.m4' or \`configure.in'. You might want
65			to install the \`Automake' and \`Perl' packages. Grab them from
66			any GNU archive site."
67			touch aclocal.m4
68			;;
69
70			autoconf)
71			echo 1>&2 "\
72			WARNING: \`$1' is missing on your system. You should only need it if
73			you modified \`configure.in'. You might want to install the
74			\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
75			archive site."
76			touch configure
77			;;
78
79			autoheader)
80			echo 1>&2 "\
81			WARNING: \`$1' is missing on your system. You should only need it if
82			you modified \`acconfig.h' or \`configure.in'. You might want
83			to install the \`Autoconf' and \`GNU m4' packages. Grab them
84			from any GNU archive site."
85			files=`sed -n 's/^[ ]A[CM]_CONFIG_HEADER(\([^)]\)).*/\1/p' configure.in`
86			test -z "$files" && files="config.h"
87			touch_files=
88			for f in $files; do
89			case "$f" in
90			:) touch_files="$touch_files "`echo "$f" \|
91			sed -e 's/^[^:]://' -e 's/:.//'`;;
92			*) touch_files="$touch_files $f.in";;
93			esac
94			done
95			touch $touch_files
96			;;
97
98			automake)
99			echo 1>&2 "\
100			WARNING: \`$1' is missing on your system. You should only need it if
101			you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
102			You might want to install the \`Automake' and \`Perl' packages.
103			Grab them from any GNU archive site."
104			find . -type f -name Makefile.am -print \|
105			sed 's/\.am$/.in/' \|
106			while read f; do touch "$f"; done
107			;;
108
109			bison\|yacc)
110			echo 1>&2 "\
111			WARNING: \`$1' is missing on your system. You should only need it if
112			you modified a \`.y' file. You may need the \`Bison' package
113			in order for those modifications to take effect. You can get
114			\`Bison' from any GNU archive site."
115			rm -f y.tab.c y.tab.h
116			if [ $# -ne 1 ]; then
117			eval LASTARG="\${$#}"
118			case "$LASTARG" in
119			*.y)
120			SRCFILE=`echo "$LASTARG" \| sed 's/y$/c/'`
121			if [ -f "$SRCFILE" ]; then
122			cp "$SRCFILE" y.tab.c
123			fi
124			SRCFILE=`echo "$LASTARG" \| sed 's/y$/h/'`
125			if [ -f "$SRCFILE" ]; then
126			cp "$SRCFILE" y.tab.h
127			fi
128			;;
129			esac
130			fi
131			if [ ! -f y.tab.h ]; then
132			echo >y.tab.h
133			fi
134			if [ ! -f y.tab.c ]; then
135			echo 'main() { return 0; }' >y.tab.c
136			fi
137			;;
138
139			lex\|flex)
140			echo 1>&2 "\
141			WARNING: \`$1' is missing on your system. You should only need it if
142			you modified a \`.l' file. You may need the \`Flex' package
143			in order for those modifications to take effect. You can get
144			\`Flex' from any GNU archive site."
145			rm -f lex.yy.c
146			if [ $# -ne 1 ]; then
147			eval LASTARG="\${$#}"
148			case "$LASTARG" in
149			*.l)
150			SRCFILE=`echo "$LASTARG" \| sed 's/l$/c/'`
151			if [ -f "$SRCFILE" ]; then
152			cp "$SRCFILE" lex.yy.c
153			fi
154			;;
155			esac
156			fi
157			if [ ! -f lex.yy.c ]; then
158			echo 'main() { return 0; }' >lex.yy.c
159			fi
160			;;
161
162			makeinfo)
163			echo 1>&2 "\
164			WARNING: \`$1' is missing on your system. You should only need it if
165			you modified a \`.texi' or \`.texinfo' file, or any other file
166			indirectly affecting the aspect of the manual. The spurious
167			call might also be the consequence of using a buggy \`make' (AIX,
168			DU, IRIX). You might want to install the \`Texinfo' package or
169			the \`GNU make' package. Grab either from any GNU archive site."
170			file=`echo "$" \| sed -n 's/.-o \([^ ]\)./\1/p'`
171			if test -z "$file"; then
172			file=`echo "$" \| sed 's/. \([^ ]\) $/\1/'`
173			file=`sed -n '/^@setfilename/ { s/.* \([^ ]\) $/\1/; p; q; }' $file`
174			fi
175			touch $file
176			;;
177
178			*)
179			echo 1>&2 "\
180			WARNING: \`$1' is needed, and you do not seem to have it handy on your
181			system. You might have modified some files without having the
182			proper tools for further handling them. Check the \`README' file,
183			it often tells you about the needed prerequirements for installing
184			this package. You may also peek at any GNU archive site, in case
185			some other package would contain this missing \`$1' program."
186			exit 1
187			;;
188			esac
189
190			exit 0
frodo@frodo.looijaard.name	ViewVC Help
Powered by ViewVC 1.1.26